There are several problems that can affect a garage door, possibly making it virtually impossible to open or close the door when certain structures are damage. While some of these problems are relatively easy to fix and there would not even be a need to look for a garage door repair New York service provider, other cases might require a garage door to be replaced completely.
When the garage door has broken to the point where you will need to replace it completely, it is important to understand how the process works. This will help you in deciding whether or not you wish to take on this type of project yourself. We look at the process involved in the replacement of a garage door in this post.
Replacing a garage door can be both complicated and dangerous, especially when going at the project alone. For this reason, when you find that you will need to replace the entire garage door to fix the issue that is present, first make sure you get at least one additional person to help you out with the project.
Remember that the garage door itself will have significant weight to it – you do not want the door falling down on you while you are going about the replacement procedure.
The first step to replacing a garage door is to get the old one off the wall. The specific steps that you will need to take when you are removing the old door really depends on the specific product. There are cases where you will only need to remove a few fixtures – but always take a closer look at where fixtures have been used to install the old garage door.
In some cases, you might be able to use the holds that were drilled into the wall for the old garage door. You should, however, ensure that they are still sturdy and not worn out – as adding the new garage door to old drill holes in the wall could lead to a loose and wonky door.
When you install the new garage door, be sure to take a closer look at the instruction manual that comes with the product. There will usually be at least a leaflet that gives you an overview of what steps you need to take in order to get the garage door to fit into the appropriate space.
Note that you should consider using new screws, hinges, and other fixtures when you fit the garage door. This will provide for a sturdier fixture to the wall and can help to reduce the risk of facing the same issue with the new garage door in the near future.
When these steps seem too tedious, however, it might be a good idea to get a garage door repair Houston company do to it for you.
The replacement of a garage door can sometimes turn out to be a complicated project and is definitely not for the inexperienced. Those with some experience and the appropriate hardware and tools should consider the step-by-step guidance we offered. If lacking in either of these departments, then getting someone who offers garage door repair Los Angeles services might certainly be a better idea.
Call Us For: Garage door repair Chicago
Written By
When it comes to a DIY garage door repair project, things are not always as simple as they may seem. Sure, there are a few repair jobs that anyone can do. On the other hand, some of the procedures required to fix a broken garage door are better left to the professionals. A garage door that is derailed can be quite a problem – and many people wonder if they can return it to the track by themse...
We have seen the internet and technology, in general, expand to a significant level over the last few years. There is now no longer a need to go out to a local store to buy most items that you use in your everyday lives. The internet has also made it exceptio...